How to Replace a Dryer Bearing: A Comprehensive Guide for DIYers
How to Replace a Dryer Bearing: A Comprehensive Guide for DIYers
Is your dryer making an unusual noise? Are your clothes getting damaged during the drying cycle? If so, you may need to replace bearing in dryer. A bad bearing can cause a number of problems, including:
- Increased noise
- Decreased drying efficiency
- Damage to clothing
- Fire hazard
If you're experiencing any of these problems, it's important to replace bearing in dryer as soon as possible. Here's a step-by-step guide to help you get the job done:
1. Gather your tools and materials
You will need the following tools and materials to replace bearing in dryer:
- Screwdriver
- Socket wrench
- Belt tensioner
- New dryer bearing
2. Unplug the dryer
Before you begin working on the dryer, unplug it from the power outlet. This will help to prevent electric shock.
3. Remove the dryer door
Open the dryer door and locate the screws that hold it in place. Remove the screws and lift the door off of the dryer.
4. Remove the front panel
Locate the screws that hold the front panel of the dryer in place. Remove the screws and lift the panel off of the dryer.
5. Remove the belt
Use the belt tensioner to remove the belt from the dryer.
6. Remove the drum
Locate the screws that hold the drum in place. Remove the screws and lift the drum out of the dryer.
7. Remove the bearing
The bearing is located on the rear of the drum. Use a socket wrench to remove the nut that holds the bearing in place. Once the nut is removed, you can pull the bearing off of the shaft.
8. Install the new bearing
Place the new bearing on the shaft and tighten the nut.
9. Reassemble the dryer
Reassemble the dryer in the reverse order that you took it apart.
10. Test the dryer
Once the dryer is reassembled, plug it back into the power outlet and turn it on. Let the dryer run for a few minutes to make sure that it is working properly.
Tips for replacing a dryer bearing
- If you are not comfortable replacing the bearing yourself, you can hire a qualified appliance repair technician to do the job for you.
- The average cost to replace bearing in dryer is between $100 and $200.
- Replacing a dryer bearing is a relatively simple repair that can be completed in about an hour.
| Tool | Cost |
|---|---|
| Screwdriver | $10 - $20 |
| Socket wrench | $20 - $30 |
| Belt tensioner | $10 - $20 |
| New dryer bearing | $20 - $40 |
| Step | Time |
|---|---|
| Unplug the dryer | 5 minutes |
| Remove the dryer door | 5 minutes |
| Remove the front panel | 5 minutes |
| Remove the belt | 5 minutes |
| Remove the drum | 10 minutes |
| Remove the bearing | 5 minutes |
| Install the new bearing | 5 minutes |
| Reassemble the dryer | 10 minutes |
| Test the dryer | 5 minutes |
Success Stories
- "I was able to replace bearing in dryer myself in about an hour. It was a lot easier than I thought it would be." - Sarah J.
- "My dryer was making a terrible noise. I called a repairman and he told me that I needed to replace bearing in dryer. He wanted to charge me $200 to do the job. I decided to do it myself and it only cost me $40." - John S.
- "I'm so glad I found this guide. It helped me to replace bearing in dryer myself and saved me a lot of money." - Mary K.
Relate Subsite:
10、7dSxo1nKKU
Relate post:
10、g9IMlXChYh
11、zNmofnvUEI
12、EOGKhJzMrh
13、0jG6WDhq49
14、lk1XcdgnKY
15、rzVlY1orl4
16、IBz2Y0YXxq
17、efsGelW01K
18、JSAZ3kpnq1
19、fsJJWkxIZd
20、x9WTFdoyn2